Image 1 of 1
KFA SAFARI MK3 - QUICK BUILD KIT
What is included?
Wing QB - $73,000 The wing QB and rigging is included in our standard price.
Stage 1 - $103,000 Save approximately 300-400hrs of building time and let the factory do the critical work for you!!! Approximately 250 - 400hrs of work left. (Depending on your options)
Options listed below are for the Stage 1 QB options.
XL Firewall back
Fuselage
Carbon floorboards for cockpit and luggage, carbon glare shield, carbon centre console, carbon kick panels, carbon elevator trim tab.
Carbon boot cowl
Roof, turtle deck, butt-ribs and much more
Control system including pulleys and cables for rudder.
All hardware - bolts, nuts, washers, fittings and rod-ends.
Fuselage stringers
Seat, four point harness with fittings
Electric trim servo (Does not include the button or indicator)
Header tank with fuel low warning sensor installed
Fuel valves and fuel lines from tanks to valves and header tank.
Windscreen glass
Door glass (Top and bottom)
Roof and turtle deck windows
Gas lifts for doors
Quick Build
Floor boards and controls fitted
Control travels set
Luggage bay covered
Butt ribs fitted
Roof dry fitted
Rudder and Horizontal stab ribs fitted
Very little to do before covering.
Optional
BRS brackets
Wings
Including Quick build wings and wing rigging
Flaperons dry-fitted and control travels set
2 x 17 gal fuel tanks
Carbon leading edge cuff, wing tips and lift strut speed fairings
Spars with brackets, rivets and bolts
Lift struts
Landing gear
Matco 8" rims
Extended gear (4" lift)
27.5 x 8" bush wheels
Dual piston brake callipers
Complete KFA Buffalo suspension system with cabane
Axles, bearings, bolts, nuts and other hardware
Covering kit
KFA PU system- fabric, glue, pinked tapes, PU up to base color
Firewall Forward kit - KFA 912 ULS-ST (135hp) (Carbon)
Bottom and top cowl
Firewall engine mount
Oil cooler and bracket
Water cooler and bracket
Carbon landing light holders
Naca duct for water cooler
Naca for air intake
Airfilter box with air filter
Optional (ordered separately)
Oil and water hoses with fittings
Fuel pumps (Andair)
Fuel pre-filters and high pressure filter
More firewall forward engine options available. Please call
What is not included in our kits? (We can supply all these)
Engine
Propeller
Avionics
Upholstery (Leather and fabric choices)
Wiring and electrical components (Switches, batteries etc)
Paint
Instrument panel cutting
Firewall forward fuel and oil lines including fittings
Terms and Conditions apply
What is included?
Wing QB - $73,000 The wing QB and rigging is included in our standard price.
Stage 1 - $103,000 Save approximately 300-400hrs of building time and let the factory do the critical work for you!!! Approximately 250 - 400hrs of work left. (Depending on your options)
Options listed below are for the Stage 1 QB options.
XL Firewall back
Fuselage
Carbon floorboards for cockpit and luggage, carbon glare shield, carbon centre console, carbon kick panels, carbon elevator trim tab.
Carbon boot cowl
Roof, turtle deck, butt-ribs and much more
Control system including pulleys and cables for rudder.
All hardware - bolts, nuts, washers, fittings and rod-ends.
Fuselage stringers
Seat, four point harness with fittings
Electric trim servo (Does not include the button or indicator)
Header tank with fuel low warning sensor installed
Fuel valves and fuel lines from tanks to valves and header tank.
Windscreen glass
Door glass (Top and bottom)
Roof and turtle deck windows
Gas lifts for doors
Quick Build
Floor boards and controls fitted
Control travels set
Luggage bay covered
Butt ribs fitted
Roof dry fitted
Rudder and Horizontal stab ribs fitted
Very little to do before covering.
Optional
BRS brackets
Wings
Including Quick build wings and wing rigging
Flaperons dry-fitted and control travels set
2 x 17 gal fuel tanks
Carbon leading edge cuff, wing tips and lift strut speed fairings
Spars with brackets, rivets and bolts
Lift struts
Landing gear
Matco 8" rims
Extended gear (4" lift)
27.5 x 8" bush wheels
Dual piston brake callipers
Complete KFA Buffalo suspension system with cabane
Axles, bearings, bolts, nuts and other hardware
Covering kit
KFA PU system- fabric, glue, pinked tapes, PU up to base color
Firewall Forward kit - KFA 912 ULS-ST (135hp) (Carbon)
Bottom and top cowl
Firewall engine mount
Oil cooler and bracket
Water cooler and bracket
Carbon landing light holders
Naca duct for water cooler
Naca for air intake
Airfilter box with air filter
Optional (ordered separately)
Oil and water hoses with fittings
Fuel pumps (Andair)
Fuel pre-filters and high pressure filter
More firewall forward engine options available. Please call
What is not included in our kits? (We can supply all these)
Engine
Propeller
Avionics
Upholstery (Leather and fabric choices)
Wiring and electrical components (Switches, batteries etc)
Paint
Instrument panel cutting
Firewall forward fuel and oil lines including fittings
Terms and Conditions apply